[left]Veeam Backup & Replication – это быстрая, удобная и надежная защита данных и приложений в виртуальной среде.[/left]
[left]Год: 2012 Размер: 1,08 Гб Разработчик: Veeam Software Язык интерфейса: Английский Таблетка: Присутствует Версия: 6.1 Разрядность: 32bit+64bit
Veeam Backup & Replication сочетает возможности резервного копирования и репликации в одном продукте и представляет дополнительные преимущества защиты данных – как для VMwarevSphere, так и для Microsoft Hyper-V.
Доп. информация: Представленное разработчиком решение характеризуется улучшенной масштабируемостью, повышенной производительностью и усовершенствованными средствами репликации данных. Также сообщается о реализации функции мгновенного восстановления файлов гостевой операционной системы напрямую из резервной копии и оптимизации механизмов обработки и восстановления данных по WAN-каналам. Особое внимание специалистами компании уделяется реализации в Veeam Backup & Replication 6 отсутствовавшей ранее поддержки платформы Hyper-V. Продукт не требует установки агентов для лицензирования, развертывания, поддержания или мониторинга, допускает создание резервных копий в инкрементальном режиме, обеспечивает работу со всеми виртуальными машинами, включая те, которые используют технологию кластеризованных томов (Cluster Shared Volumes), и может похвастаться встроенными функциями дедупликации и компрессии данных.
VMware Virtual Machines Virtual Hardware • Virtual machines with disks engaged in SCSI bus sharing a re not supported, because VMware does not support snapshotting such VMs. • RDM virtual disks in physical mode, Indepen dent disks and disks connected via in-guest iSCSI initiator are not supported and are skipped from processing automatically. OS • All operating systems supported by VMware are supported. • Microsoft VSS integration is supported for Windows XP (32bit only), Windows 2003, Windows 2003 R2, Windows Vista, Windows 2008, Windows 2008 R2 and Windows 7. • Native file level restore supports Microsoft Windows file systems only (NTFS and FAT). • Multi-OS file level restore wizard supports the following file systems: OS Supported File Systems Linux ext,ext2,ext3,ext4,ReiserFS,JFS,XFS Unix JFS,XFS,UFS Solaris ZFS BSD UFS,UFS2 Mac HFS,HFS+ Windows NTFS,FAT,FAT32 • Multi-OS file level restore supports Linux LVM (Logical Volume Manager) and Microsoft Windows LDM (Logical Disk Manager) dynamic disks. Software • VMware Tools (optional)
Microsoft Hyper-V Infrastructure Platforms • Windows Server 2008 R2 SP1 Hosts • Windows Server Hyper-V 2008 R2 SP1 • Microsoft Hyper-V Server 2008 R2 SP1 Software • Microsoft System Center Virtual Machine Manager 2008 R2 SP1 (optional)
Hyper-V Virtual Machines Virtual Hardware • All virtual hardware is supported. • Pass-through virtual disks and disks connected via in-guest iSCSI initiator are not supported and are skipped from processing automatically. OS • All operating systems supported by Hyper-V are supported. • Microsoft VSS integration is supported for Windows XP (32bit only), Windows 2003, Windows 2003 R2, Windows Vista, Windows 2008, Windows 2008 R2 and Windows 7. • File level restore supports Microso ft Windows file systems only (NTFS and FAT). Software • Hyper-V integration components (optional)
Veeam Backup & Replication Server Hardware CPU : modern x86/x64 processor (minimum 2 cores). Using faster multi-core processors improves data processing performance, and allows for more concurrent jobs. Memory: 2048MB RAM (remote SQL server), 4096MB RAM (local SQL server). Using faster memory (DDR3) improves data processing performance. Hard Disk Space: 300MB for product installation. 1 GB per 500 VM for guest file system catalog folder (persistent data). Sufficient free disk space for Instant VM Recovery cache (non-persistent data, at least 10GB recommended). Network: 1 Gbps LAN for on-site backup, 1 Mbps or faster WAN for off-site backup and replication. High latency links are supported, but TCP/IP connection must not drop. OS Both 32 -bit and 64-bit versions of the following operating systems are supported: • Microsoft Windows XP SP3 • Microsoft Windows Server 2003 SP2 • Microsoft Windows Vista SP2 • Microsoft Windows Server 2008 SP2 • Microsoft Windows Server 2008 R2 SP1 • Microsoft Windows 7 SP1 Software • Microsoft SQL Server 2005/2008 (SQL 2005 SP4 Express is included in the setup) • Microsoft .NET Framework 2.0 SP1 (included in the setup) • Microsoft PowerShell 2 .0 or later (optional) • System Center Virtual Machine Manager 2008 R2 Admin UI (optional, to be able to register SCVMM servers with Veeam Backup & Replication infrastructure)
Backup Proxy Server Hardware CPU : modern x86/x64 processor (minimum 2 cores). Using faster multi- core processors improves data processing performance, and allows for more concurrent jobs. Memory: 2048MB RAM. Using faster memory (DDR3) improves data processing performance. Hard Disk Space: 300MB. Network: 1 Gbps LAN for on-site backup, 1 Mbps or faster WAN for off-site backup and replication. High latency links are supported, but TCP/IP connection must not drop. OS For VMware backup proxy server, both 32-bit and 64-bit versions of the following operating systems are supported: • Microsoft Windows XP SP3 • Microsoft Windows Server 2003 SP2 • Microsoft Windows Vista SP2 • Microsoft Windows Server 2008 SP2 • Microsoft Windows Server 2008 R2 SP1 • Microsoft Windows 7 SP1 For Hyper-V off-host backup proxy server, only the following operating system is supported: • Microsoft Windows Server 2008 R2 SP1 with Hyper-V role enabled
Backup Repository Server Hardware CPU : any x86/x64 processor. Memory: 1024 MB RAM. Network: 1 Gbps LAN for on-site backup, 1 Mbps or faster WAN for off-site backup and replication. High latency links are supported, but TCP/IP connection must not drop. OS Both 32-bit and 64-bit versions of the following operating systems are supported: • Linux (must have SSH and Perl) • Microsoft Windows XP SP3 • Microsoft Windows Server 2003 SP2 • Microsoft Windows Vista SP2 • Microsoft Windows Server 2008 SP2 • Microsoft Windows Server 2008 R2 SP1 • Microsoft Windows 7 SP1
Veeam Backup & Replication Enterprise Manager Hardware Processor : x86/x64 processor. Memory: 2048MB RAM. Hard Disk Space: 100 MB for product installation plus sufficient disk space to store guest file system catalog from connected backup servers (according to data retention policy). Network: 1 M bps or faster connection to Veeam Backup & Replication servers . OS Both 32-bit and 64-bit versions of the following operating systems are supported: • Microsoft Windows XP SP3 • Microsoft Windows 2003 SP2 • Microsoft Windows Vista SP2 • Microsoft Windows 2008 SP2 • Microsoft Windows 2008 R2 SP1 • Microsoft Windows 7 SP1 Server Software • Microsoft Internet Information Services 5.1 or later ("IIS 6.0 Metabase Compatibility" and "Windows Authentication" components are required for IIS 7.0) • Microsoft SQL Server 2005/2008 (SQL 2005 SP 4 Express included in the setup) • Microsoft .NET Framework 2.0 SP1 (included in the setup) Client Software • Microsoft Internet Explorer 7.0 or later, or Mozilla Firefox 3.0 or later. • Microsoft Excel 2003 or later (to view Excel reports)
Veeam Backup Search Server Hardware Refer to Microsoft Search Server system requirements. OS Refer to Microsoft Search Server system requirements. Software • Microsoft Search Server 2008 (including Express Edition). • Microsoft Search Server 2010 (including Express Edition).
Backup Target Backup can be performed to the following targets: • Direct Attached Storage (DAS) connected to the backup repository server, including USB drives. • Network Attached Storage (NAS) able to represent itself as CIFS (SMB) share (direct operation), or NFS share (must be mounted on Linux backup repository server). • Storage Area Network (SAN). Backup repository server must be connected directly into SAN fabric via hardware HBA or software iSCSI initiator, and the corresponding volumes must be seen in the Microsoft Windows Disk Management snap-in).
Процедура инсталляции 1. Запускаем Veeam_Backup_Setup_x64.exe (Veeam_Backup_Setup_x86.exe) 2. При запросе лицензии запускаем keygen.exe и нажимаем на кнопку "Patch", при этом производится патчинг veComLic32.dll и veComLic64.dll. 3. Не закрывая keygen.exe генерим нужную нам лицензию и выбираем ее. Или используем готовую. 4. После завершения инсталляции останавливаем службы Veeam. Это производится нажатием на кнопку "Service" в keygen.exe, или стандартными средствами ОС через оснастку services.msc. 5. Запускаем заново keygen.exe если он не запущен и нажимаем на кнопку "Patch", при этом производится патчинг veComLic.dll. 6. Запускаем ранее остановленные службы Veeam. Это производится нажатием на кнопку "Service" в keygen.exe, или стандартными средствами ОС через оснастку services.msc.
Обновление торрента 16.09.2012 В сборку добавлены:
1. Application Item Restore Wizards (VMware only): • Universal Recovery • Microsoft Active Directory • Microsoft Exchange • Microsoft SQL Server
2. Patch 1 Release Notes for Veeam Backup & Replication 6.1.0.181: Problem: These are the issues resolved by the Patch 1 for Veeam Backup version 6.1.0.181. All patches are cumulative so each below fix is contained in this patch. Cause: Please confirm you are running version 6.1.0.181 prior to applying this patch. You can check this under Help | About in Veeam Backup & Replication console. General • When backing up to a CIFS share, network connectivity issue during backup may cause backup storage to re-initialize, causing the following runs to fail with the “There is no FIB [summary.xml] in the specified restore point” error. • Scheduled jobs fail to start when configuration database contains at least one record of unlicensed hypervisor host. For example, this may start happening once the licensed socket count has been exceeded. • Transform fails with "Full point was not found" error for backup jobs that had their backup mode changed more than once. • 1-Click FLR to the original location fails for files with ACL containing explicit ACEs and located on non-system drive. • Failover Re-IP process fails for VMs with file level restore sessions active. • Low space warning notification is not disabled when the corresponding check box is cleared. • A number of bug fixes and performance improvements around the new GUI. VMware • In some cases, backup in Virtual Appliance (hot add) processing mode may be failing with the "File name is too long" error. Usually happens when VMware vCenter server has a long name. • Processing two VMware VMs with the same IDs (from different host) simultaneously results jobs skipping the VM with the "VM is locked by another task" event logged. • Depending on the network infrastructure, automatic network mode backup proxy selection algorithm may sometimes pick a proxy from a different subnet. • Unused thick disks blocks on replica VM may contain random data instead of zeroed blocks. Hyper-V • On localized Hyper-V servers, restore does not work properly for VMs with SCSI disks. • Backup of a Linux VM with Hyper-V integration tools version 3.2 or earlier fails. • Hyper-V offhost backup may fail when both VM configuration files and disks are located on the same volume. • Hyper-V replication resets vNIC settings of the source VM, whenever replication is performed to the same host or cluster. • Under certain environment conditions, Veeam Hyper-V Integration service may fail to start. • Under rare circumstances, backup for Hyper-V VMs with pass-through disks may fail. SureBackup • SureBackup job may fail when processing domain controller VMs with the “Value was either too large or too small for an Int32” error. • SureBackup job never stops if some VMs are present in both the application group and one of the linked jobs at the same time. • SureBackup jobs may fail for DC VMs with file level restore sessions active. • Virtual lab prevents usage of network interfaces with APIPA addresses, if VM has at least non-APIPA network interfaces. • Virtual lab network mapping cannot be set for virtual networks with special symbols in names. New Features and Enhancements Patch 1 brings the following additional changes and enhancement: •Increased synthetic full transformation, and reverse incremental backup performance (up to a few times depending on backup storage). • Improved Direct SAN Access mode performance by disabling excessive VDDK logging. • Processing engine should now be much more tolerant to network packet loss. • Added PowerShell cmdlet for VeeamZIP operation. • Added new registry value that reverses the sequence of application-aware processing, making jobs try network-less processing mode before network one. HKEY_LOCAL_MACHINE\SOFTWARE\VeeaM\Veeam Backup and Replication DWORD: InverseVssProtocolOrder Value = 1 To disable (default behavior), value is 0 (false) • Increased certain network-less application aware processing timeouts to make it work more reliably with applications requiring longer time to perform VSS quiescence. • Added internet access from virtual lab environment for VMs using port groups other than first. • Reduced the amount of logs application-aware processing produces on guest VMs. • Added support for application-aware processing for VM's that use EFI boot. More Information: After applying this patch, when you run Veeam Backup & Replication for the first time, you will be prompted by the Components Update screen. Please allow the update to proceed on your connected servers to complete the update. You can then proceed to check under Help | About to confirm you are on version 6.1.0.205.
[/img][/center] 
